SHALIBOND APP

ShaliBond® APP is synthetic rubberized adhesive for fixing APP membrane, thus making it a virtual self adhesive. ShaliBond® APP has superior bond and high flexibility to accommodate natural expansion and contraction.

Application:

• ShaliBond® APP is used as bonding adhesive to affix bituminous membrane with release film
• ShaliBond® APP is suitable and convenient for application, On corrugated asbestos / metallic sheet,  Areas where torching / heating is prohibited / uneconomical.

Advantages:

• Easy to apply by brush / spray
• Cold applied adhesive for bituminous membrane. No torching / heating required
• Bonds TarFelt APP over concrete, metal or existing bituminous membrane
• Seal pores on concrete surfaces
• Facilitates application of TarFelt APP in areas where torching / heating is prohibited, in smaller areas where torching is difficult, uneconomical, inconvenient or hazardous.

Application Methodology Surface Preparation:

• Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface smooth before applying ShaliBond® APP.

Material Preparation:

• Stir ShaliBond® APP thoroughly before use

Application of Material:

• Apply ShaliBond® APP on the substrate by trowel or brush
• Allow solvent to evaporate and fix up TarFelt APP, while ShaliBond® APP is still tacky, by applying pressure uniformly
• Ensure 100 mm overlap for membrane to membrane lap joint
• Allow 3-4 days for full dry

Health & Safety:

• Avoid contact with skin / eyes and avoid swallowing
• Ensure adequate ventilation and avoid inhalation of vapor
• Wear suitable protective clothing, gloves and eye protection
• In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area
• In case of eye contact, wash immediately with plenty of clean water and seek medical advice
• If swallowed seek medical attention immediately. Do not induce vomiting