Hyperplas Fibreglass APP

Hyperplas Fibreglass is a high softening point, APP modified polymeric waterproofing membrane manufactured to the highest international standards. It consists of a center core of non woven Fiberglass mat for extra mechanical strength. The center core is protected on both sides with Polymeric Asphaltic mix, which has high penetration, high heat resistance, and high softening point. With high tensile strength, the membrane is still extremely flexible and pliable to adapt to contours. For this reason, this membrane makes an ideal waterproofed. Hyperplas Fibreglass is also available with a dual center core of a High Molecular High Density Polyethylene film. This additional polyethylene core provides additional security. Hyperplas Fibreglass is available in grades of 1.5mm, 2mm, 3mm, 4mm, 3Kg, 3.5Kg or 4Kg/sqm. Application of Hyperplas Fibreglass is fast and easy. A smooth surface with a minimum slope is required to apply the membrane. The surface is first cleaned to eliminate all sharp projections. Suitable IWL Primer / IWL CS / IWL Blown Bitumen is then coated on the surface (for more details refer relevant data sheets of Primer or Blown Bitumen). Hyperplas Fibreglass is unrolled over the surface with torch application (with overlaps of 10cm) and bonded to the substrate. The overlaps are to be sealed by flame torch. Special care is to be taken at singularities such as drains, expansion joints, etc. Details of the application are available in the Hyperplas Application Guide. Hyperplas Fibreglass can be topped with topping such as cement screed or tiles on accessible roofs with a chicken wire mesh reinforcement. Inaccessible roofs can be topped with a layer of IWL Bitumen and IWL Aluminum Paint.