SuperSilverShield® is an anti-corrosive, waterproofing paint with an aluminum finish. It is composed of oxidized bitumen, solvents, and a specially formulated aluminum compound.
Key Features:
-
Anti-Corrosive Protection: Provides a protective barrier against corrosion, extending the lifespan of treated surfaces.
-
Waterproofing: Offers effective waterproofing, preventing water ingress and associated damage.
-
Aluminum Finish: Imparts a reflective aluminum coating, enhancing surface durability and appearance.
-
Composition: Made from oxidized bitumen, solvents, and a specially formulated aluminum compound, ensuring robust performance.
Field of Application
• Used as a decorative and protective coating over tar and bitumen-based finishes to protect them against ultraviolet degradation.
• It is the recommended protective finish for bitumen-type waterproofing roof materials.
• Also used for general steelwork for better heat reflectivity.
Advantages
• Deflects UV rays and prevents degradation of membrane arising out of exposure to sunlight.
• Highly reflective.
• Goes on directly to surfaces without priming.
• Bitumen content adds to water resistance of the coating.
Application Information
✓ Substrate Temperature +10°C Min / +40°C Max
✓ Ambient Temperature +10°C Min / +40°C Max
✓ Substrate Moisture Content < 5%
Application Methodology
➢ Surface Preparation
• Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface before applying SuperSilverShield®.
• Undercoat is not necessary for its application
➢ Material Preparation
• Undercoat is not necessary for its application.
• As the aluminium pigment settles very easily SuperSilverShield® must it be stirred well
before use with a flat paddle to an even consistency.
➢ Application of Material
• Apply SuperSilverShield® on the prepared surface by brush / roller / spray.
• Apply 1 or 2 coats allowing overnight drying between coats.
• SuperSilverShield® can be applied over old painted surfaces without burning off or scraping, provided the old surface is not in a flaky condition.
Precautions
• Avoid excessively thick applications which will retard drying time.
• Coat SuperSilverShield® in one direction only and not in any criss-cross direction.
• Not a heat resistant aluminium finish.
• SuperSilverShield® must not be applied to roofs that act as catchments for drinking water at all.
• Cannot be over coated with emulsion paint.
• Product should not be applied to areas which will remain submerged under water.
• A maintenance coat after 2 - 3 year after completion of the project will be required for continual protection and correct product performance.
Brand TDS : https://stpltd.com/wp-content/upload/TDS/Super-Silver-Shield.pdf
Reviews
There are no reviews yet.